|
|
|
|
|
|
|
JP Comp SS / Muzzle brake AR15 |
NZ$ 170.00
|
Efficient Reduction Of Felt Recoil; Legal For Tactical Matches
Low-profile Stainless steel compensator redirects and harnesses combustion gas energy to reduce felt recoil by as much as 70% compared to an uncompensated barrel. Helps the shooter stay on target for accurate follow-up shots and fast transition to the next target. Built to the exacting requirements of noted professional weapons instructor and tactical competition shooter Bennie Cooley to combine the recoil reduction of J.P.’s popular Recoil Eliminator muzzle brake in a slim, streamlined compensator that meets the 1" x 3" size requirements of SOF, WC 3-Gun, USPSA Limited, and other tactical rifle competitions. Large, flat interior baffle surfaces allow the bullet to pass through while redirecting the rapidly expanding gas to the sides and slightly forward through the square-cut side vents to create forward thrust that counteracts bullet recoil. The higher the pressure, the more counteracting force the comp actually provides. In addition, four tuned ports on top minimize muzzle rise, further helping the shooter keep the sights on target. Solid bottom prevents kicking up a dust signature when shooting prone. Precision-machined from high-grade carbon steel, with a tough matte black oxide finish, or stainless steel with a brightly polished surface. All models fit rifles chambered in .223/5.56mm; can be bored out for larger calibers. Standard Profile available for barrels with .750" or .875" O.D. at muzzle....
|
|
>more details
|
|
|
Compensator / Muzzle brake AR15 |
NZ$ 45.00
|
Looks Right, Reduces Recoil On Pre-& Post-Ban Rifles
Machined from bar stock with an integral, solid baffle that won’t shoot out. Top and side ports counter recoil and muzzle rise. Solid bottom controls dust printing. A-2-style looks correct on pre- and post-ban rifles. Use roll pin for permanent installation....
|
|
>more details
|
|
|
223-224 Muzzle Brake AR15 |
NZ$ 95.00
|
Designed to provide maximum braking ability in the smallest size possible
One inch overall length
Two rows of 0.125” ports evenly distribute exiting gasses and pressure
Wrench flats on each side for simple installation
Available in tool steel with a black oxide finish or stainless steel
Available with a 0.75” OD for perfect fitting to AR-15 or precision rifle barrels
0.75” OD models feature ½-28 threads...
|
|
>more details
|
|
|
223-224 AR15 Short Muzzle Brake |
NZ$ 95.00
|
Designed to provide maximum braking ability in the smallest size possible
One inch overall length
Two rows of 0.125” ports evenly distribute exiting gasses and pressure
Wrench flats on each side for simple installation
Available in tool steel with a black oxide finish or stainless steel
Available with a 0.75” OD for perfect fitting to AR-15 or precision rifle barrels
0.75” OD models feature ½-28 threads...
|
|
>more details
|
|
|
Troy M14 Muzzle Brake Black M14/M1A 308 Win |
NZ$ 98.00
|
TRYSSUPM1400BT00
•Heat-treated ordnance steel construction.
•Fits M14/M1A including SOCOM-16. 3.25" OAL.
•Accepts USGI sound suppressor.
This rugged brake enhanced control and accuracy during full auto and rapid fire. The aggressive diamond-shaped teeth are designed for close quarter battle. The M14 Muzzle Brake works as an improved breaching device and enhanced recoil....
|
|
>more details
|
|
|
DPMS 308 Muzzle brake |
NZ$ 118.00
|
308BLMIC- Modeled after the Miculek Compensator for the AR, six opposing side ports direct gasses outward reducing muzzle jump and giving the LR-308's a reduced felt recoil similar to that of an AP4 Carbine. Made of 4140 steel with a manganese phosphated finish, this new compensator measures 15/16" diameter and 2 3/8" length. Thread pitch 5/8-24....
|
|
>more details
Out Of Stock
|
|
|
DPMS Muzzle brake AR15 |
NZ$ 90.00
|
Six-Port Design Directs Blast Away From Shooter
SPECS: BLMIC- Steel, parkerized finish. 2" (5cm) long, .925" (23.5mm) diameter. ½"-28 tpi.
BLMIC- Three large baffles with six side ports and no top vents direct muzzle gases to the side, away from the shooter. Effectively counters muzzle rise and recoil, minimizes felt muzzle blast. High volume shooters will appreciate reduced noise and ease of cleaning. Solid bottom minimizes dust printing when shooting prone. Easy installation, secured with the supplied lock-nut. Designed and used by Jerry Miculek....
|
|
>more details
Out Of Stock
|
|
|
JP Comp / Muzzle brake AR15 |
NZ$ 170.00
|
Efficient Reduction Of Felt Recoil; Legal For Tactical Matches
Low-profile steel compensator redirects and harnesses combustion gas energy to reduce felt recoil by as much as 70% compared to an uncompensated barrel. Helps the shooter stay on target for accurate follow-up shots and fast transition to the next target. Built to the exacting requirements of noted professional weapons instructor and tactical competition shooter Bennie Cooley to combine the recoil reduction of J.P.’s popular Recoil Eliminator muzzle brake in a slim, streamlined compensator that meets the 1" x 3" size requirements of SOF, WC 3-Gun, USPSA Limited, and other tactical rifle competitions. Large, flat interior baffle surfaces allow the bullet to pass through while redirecting the rapidly expanding gas to the sides and slightly forward through the square-cut side vents to create forward thrust that counteracts bullet recoil. The higher the pressure, the more counteracting force the comp actually provides. In addition, four tuned ports on top minimize muzzle rise, further helping the shooter keep the sights on target. Solid bottom prevents kicking up a dust signature when shooting prone. Precision-machined from high-grade carbon steel, with a tough matte black oxide finish, or stainless steel with a brightly polished surface. All models fit rifles chambered in .223/5.56mm; can be bored out for larger calibers. Standard Profile available for barrels with .750" or .875" O.D. at muzzle....
|
|
>more details
Out Of Stock
|
|
|
Claymore Muzzle break 308 |
NZ$ 145.00
|
5/8x24 Compact brake is designed to direct both blast and noise forward, away from the shooter, to effectively dampen recoil for better control. Brake gives an extremely low dust signature and features a recessed crown with a raised saw tooth rim that allows secondary use as a breeching device. Humorously inscribed with “Point Toward Enemy” and large arrow. Models available to fit rifles chambered in 7.62/.308/6.8....
|
|
>more details
|
|
|
Q Comp 308 Muzzle Brake |
NZ$ 120.00
|
The Wilson Combat Q-Comp has been designed by their compensator experts to greatly enhance recoil control in rapid fire without the harsh blast and flash that other AR-15 muzzle devices exhibit.
The Q-Comp is a hybrid Ar-15 brake/compensator that has been tuned to minimize the side-blast and concussion compared to other muzzle devices on the market. The exclusive Wilson Combat design displays almost zero muzzle flash yet retains excellent vertical and rearward recoil reduction with all calibers.
The slotted expansion chamber design of the Q-Comp has no prongs or tines to break off or snag and is Melonite QPQ coated alloy steel for maximum durability and corrosion resistance. The Q-Comp is easily installed on your AR rifle, and the included crush washer eliminates the need for a shim kit.
½-28 TPI threads with an internal bore diameter of .375” to work with most 5.56 (standard USGI thread pitch), some 300 BLK and calibers up to 9mm Luger.
5/8-24 TPI threads with an internal bore diameter of .375” for most 6.8, most .300 and .308 rifles, and some 9mm (Wilson AR-9)....
|
|
>more details
Out Of Stock
|
|
|
|
|
|
|
|