|
| Superlative Arms .750 |
|
NZ$ 190.00
|
|
The Superlative Arms patented “Bleed Off”, direct impingement, gas block for the AR15 platform adjusts the gas flow by bleeding the gas out of the block instead of restricting the flow like conventional adjustable blocks.
Results:
• The pressure used in the block is reduced only to the amount required to drive the bolt carrier. The remaining gas / pressure are bled out of the block allowing the system to run much cleaner and cooler.
• Reduction of felt recoil.
• Patent pending adjustment detent is located outside of the block and therefore no contamination.
• The gas adjustment screw does not restrict the gas flow; therefore there is no erosion or seizing of the screw / no loss of detent due to carbon build up. Although it is removable, we have added a safety mechanism, which stops you from unintentionally backing the screw all the way out.
• When using SBR’s and / or suppressors the bleed off port allows the excessive pressure to be exhausted out of the block reducing blow back.
Data:
• Gas Block Material: 416 SS
• Barrel Diameter: 0.750"
• Weight: 1.68 oz.
• Length: 1.00"
• Attachment Type: Solid
• Gas Adjustment: (Patent Pending) 30 Locked Positions, Front Of Block
• Bleed Off Port: (Patent Pending) Front Of Block
Included:
• Gas Block - Assembled
• (2) 10-32 x 3/16" Set Screws
• (1) Gas Tube Roll Pins
• (1) 3/32 X 6" L-Shaped Hex Keys
• Installation Instructions & QR code for video tutorial
• NO gas tube included...
|
|
>more details
Out Of Stock
|
|
|
|
|
| A PRI low profile Adjustable gas block .750 |
|
NZ$ 150.00
|
|
Lets You Tailor Extraction & Ejection To Individual Loads
Lightweight, steel gas block features an adjustable gas port that lets you tune the amount of gas for reliable extraction and ejection to match your ammo. Adjustment screw closes or opens the port in the block and not the gas tube; drilling of the gas tube is not required. Fits under free float tubes and does not interfere with sight picture through scopes or red-dot sights. Dual set screws on bottom of the block securely locks the block onto the barrel....
|
|
>more details
Out Of Stock
|
|
|
| A Syrac .750 Adj gas block |
|
NZ$ 230.00
|
|
For Easy Adjustment Of Gas Flow In The Field Or At The Range
Refinement of Syrac's original adjustable gas block enables the shooter to fine-tune gas flow and rifle performance in the field. Designed to fit under free-floating handguards, the block secures to the barrel with two setscrews. The Gen II model eliminates the Gen I's release button, so you simply turn the gas adjustment setscrew with the included Allen wrench to one of 18 pre-set click detent positions. Click detent automatically locks in your setting; also makes "dialing in" predetermined settings for different loads easy. Standard Low-Pro models have setscrews on the underside; requires dimpling of the barrel. 0.750" Clamp-On model wraps around the barrel and is secured with two side-mounted hex head cap screws....
|
|
>more details
Out Of Stock
|
|
|
| A seekins Adjustable Gas Block .750 |
|
NZ$ 165.00
|
|
The Seekins Precision Adjustable Gas Block lets you to fine tune your rifle's gas system for smoother cycling and operation. Regulating the amount of gas used to cycle the action allows tuning the rifle’s operation to a specific load and the use of low mass bolt carriers, buffers and springs to reduce felt recoil. This is critical to allow faster follow up shots, target acquisition and reliability.
The Seekins Precision Adjustable Gas Block is field adjustable. Operation is easy, simply turn the gas regulating screw in to lessen the amount of gas and out to add more gas, then use the brass set screw to lock the setting in place. The overall height of the gas block is 1.37” with left to right dimensions at .94” to fit under most hand guards and still have the customization of an adjustable gas block.
Melonite Coated to reduce wear and corrosion for extended periods of fire, it also makes cleaning easier, as carbon build up will not adhere to the non-reflective coated surface as much as it does on standard Parkerized finishes....
|
|
>more details
Out Of Stock
|
|
|
| Low Profile Gas Block .750 |
|
NZ$ 76.00
|
|
USA Made Won't Interfere With Extended-Length Tactical Forearms
Minimal-profile replacement for factory front sight/gas block won’t interfere with extended-length tactical forearms, while ensuring proper function of gas system for reliable cycling. Protrudes only .420" above barrel, covers less than 1" of barrel length, and adds only 1.4 oz. of weight. Compatible with M4-style carbines and M16A2/A3/A4-style rifles with any length, .750" O.D. barrel. Two steel setscrews keep the block securely anchored to the barrel to prevent shifting even under the force of full-auto recoil. Black oxide finish matches most factory barrel finishes....
|
|
>more details
Out Of Stock
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Spikes Tactical Carbine Gas Tube |
|
NZ$ 38.00
|
|
Melonite Coated For Extra Heat Resistance & Elimination Of Light Reflection
Melonite coating on hardened stainless steel gas tubes gives extra heat- and corrosion-resistance for an exceptionally long service life. Matte black finish enhances the tactical profile of rifles with open handguards by eliminating a source of accidental light reflection. Includes gas tube roll pin....
|
|
>more details
Out Of Stock
|
|
|
| Spikes Tactical Midlength Gas Tube |
|
NZ$ 32.00
|
|
Melonite Coated For Extra Heat Resistance & Elimination Of Light Reflection
Melonite coating on hardened stainless steel gas tubes gives extra heat- and corrosion-resistance for an exceptionally long service life. Matte black finish enhances the tactical profile of rifles with open handguards by eliminating a source of accidental light reflection. Includes gas tube roll pin....
|
|
>more details
Out Of Stock
|
|
|
| Spikes Tactical Pistol length gas tube |
|
NZ$ 40.00
|
|
Melonite Coated For Extra Heat Resistance & Elimination Of Light Reflection
Melonite coating on hardened stainless steel gas tubes gives extra heat- and corrosion-resistance for an exceptionally long service life. Matte black finish enhances the tactical profile of rifles with open handguards by eliminating a source of accidental light reflection. Includes gas tube roll pin....
|
|
>more details
Out Of Stock
|
|
|
|
|
| Syrac .936 Adj Gas Block |
|
NZ$ 240.00
|
|
For Easy Adjustment Of Gas Flow In The Field Or At The Range
Refinement of Syrac's original adjustable gas block enables the shooter to fine-tune gas flow and rifle performance in the field. Designed to fit under free-floating handguards, the block secures to the barrel with two setscrews. The Gen II model eliminates the Gen I's release button, so you simply turn the gas adjustment setscrew with the included Allen wrench to one of 18 pre-set click detent positions. Click detent automatically locks in your setting; also makes "dialing in" predetermined settings for different loads easy. Standard Low-Pro models have setscrews on the underside; requires dimpling of the barrel. 0.936" Clamp-On model wraps around the barrel and is secured with two side-mounted hex head cap screws....
|
|
>more details
Out Of Stock
|
|
|
| NZ Made Adjustable Gas Block (D Maisey ) |
|
NZ$ 180.00
|
|
AGB1 specifications:
• Suits barrel journal diameter: 0.750”
• Solid steel construction, black nitrided finish for surface hardness and good rust resistance
• Stainless steel M4 main adjustment screw
• 1/8” diameter detent ball and spring system (easily removable if required)
• Stainless wave pin for gas tube retention included
• Clamps securely to barrel with 2x small grub screws on underside
• Flat sides of gas block body make fitting, alignment, and gas tube installation easier
• Unique/novel offset angled adjustment screw design permits more clicks per revolution, and a
more robust and reliable screw design as the threaded section is not violated with machined slots.
• Weight: 94 grams (3.35oz). Block length: 1.250” (31.75mm)
• Low profile design – but may not be a clearance fit inside some extra-long forend tube designs of
very small diameter or restrictive internal geometry. It WILL FIT inside a fre...
|
|
>more details
Out Of Stock
|
|
|
| Radical arms .750 |
|
NZ$ 90.00
|
|
Introducing the Radical Firearms.750 Micro Adjustable Gas Block to full shutoff with zero bolt movement, 10-32 setscrew with 4-40 brass retaining screw. Same height/profile as a standard micro gas block. Melonite coating, 4140 chromoly steel, chamfered edge, Semi- press fit like the standard gas block.
Includes:
Set screws
4140 chromoly steel
Full shutoff with zero bolt movement
Nitride/Melonite QPQ finish
Chamfered edge, semi-press fit like our standard gas block
USA made steel & Machined in the USA
Weighs 2oz
Internal Diameter 0.750
Same profile as our standard low-profile gas block
Includes (2) set screws for attachment
Includes 10-32 Set-Screw w/ 4-40 Retaining Screw (Rearward facing)...
|
|
>more details
|
|
