|
| CMMG 22lr barrel and bolt kit for AR15 |
|
NZ$ 920.00
|
|
Government Profile 20"
4140 Chrome Moly
Salt Bath Nitride Finish inside and out
1:16 Twist
Comes with 1 magazine
22LR Sprorting Chamber
Threaded 1/2-28
.750″ Rifle length Journal
extra 15 rnd mags available at $55ea...
|
|
>more details
|
|
|
|
|
| Claymore Muzzle break 308 |
|
NZ$ 145.00
|
|
5/8x24 Compact brake is designed to direct both blast and noise forward, away from the shooter, to effectively dampen recoil for better control. Brake gives an extremely low dust signature and features a recessed crown with a raised saw tooth rim that allows secondary use as a breeching device. Humorously inscribed with “Point Toward Enemy” and large arrow. Models available to fit rifles chambered in 7.62/.308/6.8....
|
|
>more details
|
|
|
|
|
| Troy M14 Muzzle Brake Black M14/M1A 308 Win |
|
NZ$ 98.00
|
|
TRYSSUPM1400BT00
•Heat-treated ordnance steel construction.
•Fits M14/M1A including SOCOM-16. 3.25" OAL.
•Accepts USGI sound suppressor.
This rugged brake enhanced control and accuracy during full auto and rapid fire. The aggressive diamond-shaped teeth are designed for close quarter battle. The M14 Muzzle Brake works as an improved breaching device and enhanced recoil....
|
|
>more details
|
|
|
| 20" Wylde 1:8 |
|
NZ$ 575.00
|
|
AR-15/M16 Barrels, made by Satern Barrels, feature 5R button rifling and are machined from 416R gun barrel steel for a superior shooting barrel. This 223 Wylde barrel feature a stainless steel finish, for the ultimate in performance and asthetics. This barrel has a 1-8 twist, for excellent performance with heavier bullets, especially those 62gr or heavier. Available in a 20” length, with a rifle length gas system. Muzzle is threaded for ½-28 and the gas shoulder accepts .750 gas blocks. Opposite side of gas port features dimples, so that gas block set screws are secured in place, preventing movement....
|
|
>more details
|
|
|
| Criterion 6.5 creedmore 18" |
|
NZ$ 740.00
|
|
Criterion Hybrid contour match grade 6.5 Creedmoor AR barrels offer an ideal configuration for those seeking extreme accuracy without the added weight of a heavy barrel contour.
Featuring a flatter trajectory and higher ballistic coefficient than the traditional .308 Winchester alternative, the 6.5 Creedmoor has grown in popularity with many long range shooters.
Designed to be compatible with DPMS, Midwest Industries, Remington, and Fulton Armory pattern rifles, these 6.5 Creedmoor barrels can be directly swapped with factory .308 barrels.
Button rifled and hand lapped to ensure consistent bore uniformity, Criterion 6.5 Creedmoor AR barrels incorporate a 5/8 x 24 muzzle thread and finished chamber. .set for 750 gas block and rifle gas
Headspace should be checked prior to installation by a qualified gunsmith....
|
|
>more details
Out Of Stock
|
|
|
|
|
|
|
| ATI AR15 Barrel nut |
|
NZ$ 42.00
|
|
For use with screw on free float hand guards
Slotted Barrel Nut Constructed of Military Type III Anodized, 6061 T6 Aluminum
Three Set Screws Lock the Forend into Place on the Slotted Barrel Nut
Provides a Secure Fit, that cannot Rotate
Eliminates the Need for the Jam Nut
Allows Forend to be Installed Flush to the Receiver
Virtually Indestructible
Manufactured in the USA
Limited Lifetime Warranty...
|
|
>more details
|
|
|
| Anderson Manufacturing |
|
NZ$ 275.00
|
|
The Anderson Manufacturing M4 16” 5.56x45mm barrel features the classic M4 profile, for weight savings & parts commonality. The barrel has a 1-8 twist, for excellent performance with a variety of ammunition. Muzzle is threaded ½-28 for compatibility with a wide range of muzzle devices. Finish is matte black parkerized, for superior corrosion resistance. Barrel features a carbine length gas system and is .750” at the gas block. Barrel is chambered for 5.56x45mm NATO and has M4 feed ramps. The bore and chamber are non-chrome lined....
|
|
>more details
Out Of Stock
|
|
|
| Bat Machine AR10 Barrel Extension |
|
NZ$ 114.00
|
|
Ensures Snug Barrel Fit For Proper Alignment & Accuracy
Machined 4140 chrome-moly steel barrel extensions help the custom rifle builder ensure a secure barrel fit for best alignment and accuracy. Heat treated for surface hardness to give years of reliable service. Available for M4 carbine extension with feed ramp cuts. AR-Style .308 extension fits the DPMS LR-308 and other .308s with the same thread pattern, plus it offers M4-style feed ramp cuts to ensure extra reliability in getting rounds from the magazine to the chamber. All models have pre-drilled locator pin hole....
|
|
>more details
Out Of Stock
|
|
|
| 6.5 grendal barrel and bolt 18" only in stock |
|
NZ$ 660.00
|
|
AR-15/M16 barrels, made by Satern Barrels, feature 5R button rifling and are machined from 416R gun barrel steel for a superior shooting barrel. These 6.5 Grendel barrels feature a stainless steel finish. Barrels have 1-8 twist for excellent performance with a wide range of bullets.965 gms
Diameter
.697 for 18mm past thread then .725 for another 138mm then .750 for gas block
Available in 18” & 24” lengths. The 18” barrel features a mid-length gas system, while the 24” has a rifle length system. Muzzle is threaded 5/8"-24 and the gas shoulder accepts 0.750" gas block. Chamber is 6.5 Grendel II. Opposite side of gas port features a dimple for a gas block set screw. A 6.5 Grendel bolt is included with each barrel. Bolt is machined from 9310 steel with a bolt face depth of .136". Barrel extension is M4 feed ramp style. A-Cat magazines are available at $65 ea...
|
|
>more details
Out Of Stock
|
|
|
| AR-15/M16 5.56 A2 BARREL ASSEMBLY |
|
NZ$ 585.00
|
|
Ready-to-install, A2-profile 20" rifle barrel chambered for 5.56mm NATO comes with the barrel nut and extension, triangular handguard cap, and front sight tower installed. Machined from chrome-moly bar stock and magnetic particle inspected afterward to ensure quality, with a chrome-lined bore. Sight tower includes sling swivel attachment point, ready for your choice of sight post and swivel....
|
|
>more details
Out Of Stock
|
|
|
| Fulton Armoury BCG |
|
NZ$ 390.00
|
|
FA AU 037 BCG
Genuine USGI Production, NOT inferior commercial grade. We've seen just about everything out there & this is the finest BCG made.
Legal and recommended in AR-15s.
SPECS
- 158 Carpenter Steel HPT/MPI Marked Bolt
- 8620 Steel Carrier (Chrome Lined)
- Properly Staked Gas Key (Chrome Lined)
- HD Extractor Spring Assembly with Rubber O-Ring Enhancer
Why do others substitute other inferior/untested steels? To decrease the cost of the part. Carpenter 158 is a high technology steel that is very expensive and can only be ordered in 20,000 lb mill runs. It is the only steel allowed by the US (and Foreign) Militarys for the very demanding needs of this high stress, critical part.
*BARRELS & BOLTS MUST BE PROPERLY CHECKED FOR HEADSPACE PRIOR TO USE. FAILURE TO DO SO MAY RESULT IN FIREARM DAMAGE, PERSONAL INJURY, OR DEATH*...
|
|
>more details
|
|
|
| Rock River 18" |
|
NZ$ 620.00
|
|
18 Inch Mid-Length Fluted Chrome Moly Barrel with Extension and Pin
223/5.56mm NATO Chamber, 1:9 twist, threaded 1/2-28, with barrel extension and pin. Weight 37.9 ounces....
|
|
>more details
Out Of Stock
|
|
|
| Spikes Tactical BCG |
|
NZ$ 350.00
|
|
Matched bolt/carrier set is machined to mil-spec dimensions using the latest manufacturing and quality-control techniques to deliver superb reliability in both semi-auto and select-fire rifles. Carrier is hard-chromed inside and has an M16-type full-length shroud on the underside...
|
|
>more details
Out Of Stock
|
|
|
| Wilson Combat 556 18" |
|
NZ$ 560.00
|
|
1133 gms
1:7 twist Matte stainless
Rifle length gas system
Optimized For Long-Range Shooting; More Compact Than Standard Rifle Barrel
The Special Purpose Rifle (SPR) barrel replicates the barrel of the Mark 12 Mod X Intermediate sniper/designated marksman rifles used by some special operations groups. This 5.56 NATO chambered, 18" barrel with a 1-7" twist easily handles the heavier bullets needed for long-range precision shooting, while still offering a more compact platform than the standard 20" rifle. Constructed from 416R stainless steel and finished with a bead blasted matte finish. Rifle-length gas system provides reliable extraction at lower pressures.
5.56 NATO was developed in the United States and initially chambered in the M16 rifle. It is the standard cartridge for NATO forces as well as many non-NATO countries. It is derived from, but not identical to, the .223 Remington cartridge. We use a NATO, mil-spec chamber in our barrels that is reliable and safe to fire .223 Rem...
|
|
>more details
Out Of Stock
|
|
|
| Rock River Arms Heavy 20" |
|
NZ$ 675.00
|
|
1:9 Twist, Chrome Moly
223 Wylde Chamber
1/2x28 thread ,58 oz
1 MOA /100 yards
.750 at gas block
Front sight post kit and sling mount sold separatly
https://www.targetsports.co.nz/product/1324111...
|
|
>more details
Out Of Stock
|
|
|
| Faxon gunner 20" .625 Gas block included |
|
NZ$ 575.00
|
|
Designed by Faxon Firearms competition shooting staff for those who value performance and versatility, the GUNNER profile is a blend of two of the best performing profiles of all time, Gov't and Pencil.
The GUNNER's profile from the extension to the gas block mimics Government profile taper. From there, the GUNNER moves to a .625" gas block journal and a pencil profile out front.
Removing the weight from the front of the barrel ensures maximum versatility and keeps material to the rear to maximize heat resistance and mitigate whip.
Manufactured 100% in-house from cradle-to-grave, these barrels are fully stress relieved, air-gauge tested, and 11 degree target crowned to ensure superior accuracy.
Quality is imbued into our barrels from the start. Faxon starts with certified 4150 Mil-Spec steel and from there each barrel goes through a battery of tests at each operation until finished in Nitride and final inspected. All barrels are individually checked for headspace by precision custom hardened gauges.
Faxon manufactures all their barrels in Cincinnati, Ohio under ISO:9001 and AS:9100 quality certifications.
• Barrel Material: 4150 CMV Steel
• Barrel Type: Button Rifled
• Barrel Caliber: 5.56
• Barrel Twist: 1:8
• Inside Finish: QPQ Nitride
Comes with .625 low profile gas block...
|
|
>more details
Out Of Stock
|
|
|
| RRA Bolt 223 |
|
NZ$ 330.00
|
|
This complete mil-spec AR-15 bolt carrier group has the quality & durability that Rock River Arms' products are known for. This precision-made bolt carrier group comes fully assembled and ready to drop in your AR-15 rifle.
Rock River Arms
Caliber / Gauge
5.56 NATO
Carrier Style AR-15
Bolt Finish Phosphate
Carrier Finish Phosphate
Gas Key Staked...
|
|
>more details
|
|
|
| wilson 300 blk 10.5" |
|
NZ$ 570.00
|
|
Fully chambered barrels let you convert a standard .223/5.56 AR to .300 Blackout - ideal for shooting subsonic rounds through a suppressor. “Recon Tactical” profile provides strength and rigidity while remaining lightweight. Polished M4 style feed ramps aid in reliable feeding. .300 AAC Blackout features six-groove, 1-8" twist, button rifling that works well for both subsonic and supersonic ammo. 11.3" barrel has a pistol length gas system. Barrel works with standard .223/5.56 bolt and magazines...
|
|
>more details
Out Of Stock
|
|
